Controller CLARE 4.0

MANUAL MODE

rather simple operation
continuation of the program after the power blackout
help for the values setting
automatic start at set time
visual indication of the program end
automatic errors detection and their indication
controllable stopwatch at the program run
two energy consumption counters
actual time and date - work with real time
modifying parameters at the program run

PROGRAMMING MODE

fully programmable - 10 commands
to 4000 blocks in the program (extend version)
possibility to combine programs (Jump command)
command AT - the program timing
power output setting in the program
skipping program parts at the program run
input/output lines checking - programmable automat

SETUP MODE

maximal temperature and power input limitation
controller and program password protection
selection of displayed information
setting a real time clock and energy counters
definition of communication parameters
regulation parameters setting
set type and correction of a thermocouple

HARDWARE, REGULATION

highly reliable hardware architecture
storing of all values and programs in blackout
readable 12-buttons keyboard with icons
two-coloured lighting LED display
well-established AT89C52/5 microprocessor
supervisory circuit watchdog
programmable controller inputs and outputs
measurement and check of controller temperature
precise pulse and phase regulation
fluent change of parameters with increasing temperature
easy upgrade, detailed documentation

COMMUNICATION

Master(1)-Slave(15) controllers connection
Slave regulation difference (zone regulation)
possibility to add another display and keyboard
easy connection with the CLARES control system
selectable controller address (1-15)
on-line control from the superordinate PC
sending and receiving programs of the controller
selectable measurement cycle (1-3600 seconds)
4000 samples buffer (extend version)

The value of the controller will radically increase after connecting with the CLARES control system. All the system does not loose its lucidity and it offers many new useful aspects and functions.
Technical specifications:

Inputs
analogue - J, K, S, B thermocouples, Pt100 resistance sensor
digital - 5 x input with possibility to wait for state change in the program
Outputs
open collector - for SSR (solid state relay) use
electro-magnetic relay - 250 V / 5 A - contactor operation at the program run (limited temperature checking)
phase controlled (0-100 %)
voltage output 0-10 V - direct, galvanicly separated
5 x digital output controlled by the program (e.g. ALARM) optionally with SSR, electro-magnetic relay or transistor with open collector
Operation
readable 12-buttons keyboard with icons
Display
double LED - red and green
Regulation
own algorithms, improved PID regulation
possibility to set limit temperature in which contactor switches off (in breakdown of SSR)
Programs
10 programs with 15 steps (basic version)
80 programs with 50 steps (extend version)
in case that step amount is not enough it is possible to jump to another program (use Jump command at the end of the program)
Communication
1 x MASTER, 15 - SLAVE with regulation difference
possibility to add another display and keyboard
operation from the superordinate PC: RS 232 (galvanic separation optional) or RS 422 - galvanicly separated
Accuracy
calibration accuracy ą0,1 % from range
temperature stability 0,3°C / 10°C of surrounding temperature change
Surrounding
0-50°C, 0-90 % RH
Voltage
230 V / 50-60 Hz - power input 3 VA
Dimensions
96 x 96 x 165 mm - DIN 1/4
Guarantee
CE certification, 3 years

PRICES - PHOTO - MANUAL

Inputs	analogue - J, K, S, B thermocouples, Pt100 resistance sensor digital - 5 x input with possibility to wait for state change in the program
Outputs	open collector - for SSR (solid state relay) use electro-magnetic relay - 250 V / 5 A - contactor operation at the program run (limited temperature checking) phase controlled (0-100 %) voltage output 0-10 V - direct, galvanicly separated 5 x digital output controlled by the program (e.g. ALARM) optionally with SSR, electro-magnetic relay or transistor with open collector
Operation	readable 12-buttons keyboard with icons
Display	double LED - red and green
Regulation	own algorithms, improved PID regulation possibility to set limit temperature in which contactor switches off (in breakdown of SSR)
Programs	10 programs with 15 steps (basic version) 80 programs with 50 steps (extend version) in case that step amount is not enough it is possible to jump to another program (use Jump command at the end of the program)
Communication	1 x MASTER, 15 - SLAVE with regulation difference possibility to add another display and keyboard operation from the superordinate PC: RS 232 (galvanic separation optional) or RS 422 - galvanicly separated
Accuracy	calibration accuracy ą0,1 % from range temperature stability 0,3°C / 10°C of surrounding temperature change
Surrounding	0-50°C, 0-90 % RH
Voltage	230 V / 50-60 Hz - power input 3 VA
Dimensions	96 x 96 x 165 mm - DIN 1/4
Guarantee	CE certification, 3 years