Example M15

We would like to look at the latest events in the controller.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen the place where there is no graph or buttons for 8 seconds.

2. Press the button History and we will review the latest events

3. Double-press the button to return to the home screen  (Back)

Example M16

We would like to look at the penultimate course and display its graph.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen the place where there is no graph or buttons for 8 seconds.

2. By pressing the button Database we'll get to the list of the last progress

3. If no graph is displayed on the screen, by pressing the button  (once or twice) we change the display style to show the graph

4. If the penultimate progress is not already displayed, by pressing the button  we will move the listing to it

5. Press the left part of the graph to display the graph of the penultimate course

6. We return to the home screen by pressing the button three times  (Back)

Example M17

We want to find out what was the power consumption of the last run.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen where there is no graph or buttons for 8 seconds

2. Press the button Prog.info and we find out the corresponding consumption under the item Energy program

3. Double-press the button to return to the home screen  (Back)

Example M18

We would like to find out which firmware version the controller is using.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen where there is no graph or buttons for 8 seconds

2. Press the button ABOUT CLARE. Use the arrows or move your finger to find information about the firmware version (above the yellow contact for the manufacturer)

3. Double-press the button to return to the home screen  (Back)

Example M19

We want to find out what IP address the controller uses (it must be connected to the network).

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen where there is no graph or buttons for 8 seconds

2. Press the button ABOUT CLARE. Use the arrows or move your finger to find information about the IP address (WIFI or LAN)

3. Double-press the button to return to the home screen  (Back)

Example M20

We need to look at the manual and enlarge the desired page (PRO version only).

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen where there is no graph or buttons for 8 seconds

2. Press the button ABOUT CLAREand then the button  (Help)

3. Use the arrow to navigate to the desired page and then press the button

4. Return to the home screen by pressing the button three times  (Back)

Example M21

We want to find out what was the power consumption of the last run.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen where there is no graph or buttons for 8 seconds

2. Press the button Prog.info and we find out the corresponding consumption under the item Energy program

3. Double-press the button to return to the home screen  (Back)

Example M22

We want to find out what the currently set ramp (rate of temperature change) is.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen the place where there is no graph or buttons for 8 seconds

2. Press the button Prog.info and we find out the corresponding consumption under the item Energy program

3. Double-press the button to return to the home screen  (Back)

Example M23

We want to look at the set parameters of the manual mode.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen where there is no graph or buttons for 8 seconds

2. Press the button Prog.info and then the button

3. We find out the parameters and return to the home screen by pressing the button three times  (Back)

Example M24

We need to find out how long the program has been running.

1. With a button  (Menu) we get to the controller menu (if this button is not available, press on the home screen the place where there is no graph or buttons for 8 seconds

2. Press the button Prog.info and we find out at the item  PS  (Program time) duration of the program.

3. Double-press the button to return to the home screen  (Back)